MULTI-PARAMETER PATIENT MONITOR
Depending on patient status, it may be required that more than one patient physiological parameter needs to be monitored. This is where the Multi-Parameter Patient Monitor MP50, MP70 comes into play. These devices can be pre-configured or can be modular in their concept. Usually these monitors are located at the patient bedside and are setup to monitor the parameters of: ECG, NIBP, SPO2, Temperature and Invasive Blood Pressures (IBP’S). These bedside monitors are normally connected to a Central Station where these parameters can be closely observed. A pre-configured monitor comes with certain, fixed parameters to monitor. The Modular units can be changed by the addition or removal of certain parameter module which gives the staff greater flexibility in patient care. Typically these types of monitors are found in the Emergency Room or the Intensive Care Unit where long term, in depth monitoring is required. Our most comprehensive multi-parameter patient monitor is the GE Dash Monitor. It monitors ECG, NIBP, SPO2, and temperature. It also has additional options for IBP, ETCO2, Twelve lead ECG, and Recorder. GE Dash Monitors are lightweight, portable, and battery-powered, making them ideal for every point of care.